Rockwell Automation TD200 AC Drive V1.0, 0.3-20V RMS, 3-Ph, 63A - Manual (Page 9)

Introduction to the Drive 1-1
C
HAPTER
1
Introduction to the Drive
This chapter describes the drive and how to identify it using the model number matrix.
It also provides an illustration of the drive showing the locations of major components.
1.1 Drive Description
The drive is powered by a nominal +28 VDC input, and provides a three-phase AC
variable frequency and voltage output to control a 63 amp AC motor (maximum
continuous amps).
1.2 Identifying the Drive by Model Number
Each 2 HP AC drive can be identified by its model number. See figure 1.1. This
number appears on the shipping label and on the drive’s nameplate. The drive’s model
number includes the Power Module and the regulator version.
1.3 Getting Assistance from Reliance Electric
If you have any questions or problems with the products described in this instruction
manual, contact your local Reliance Electric sales office. For technical assistance, call
1-800-726-8112.
Figure 1.1 – Identifying the Drive Model Number
1 TD 20 002
Catalog Number
TD = Universal
Input Voltage
20 = +28 VDC
Horsepower Rating
002 = 2 HP