Rockwell Automation 1440-PK02-05M2 XM-720 Machine Monitor - Manual (Page 18)

Publication GMSI10-UM001C-EN-E - June 2011
18 Installing the XM-720 Machine Monitor
Figure 2.6 Wiring Connection for Warning Relay (Non-failsafe)
Trip Relay
In the provided configuration files, the Trip relay is configured to activate
when the overall measurement in either channel exceeds the danger threshold
level (same conditions that activate the Trip LED). This relay is also
configured as a non-failsafe relay. Figure 2.7 shows the on-board relay
connection for the Trip relay.
The danger threshold level and the behavior of the relay can be changed using
the XM Serial Configuration Utility. Refer to Editing the XM-720 Parameters
on page 44.
Figure 2.7 Wiring Connection for Trip Relay (Non-failsafe)