Rockwell Automation 1440-PK02-05M2 XM-720 Machine Monitor - Manual (Page 9)

9 Publication GMSI10-UM001C-EN-E - June 2011
Chapter
2
Installing the XM-720 Machine Monitor
This chapter discusses how to install and wire the XM-720 monitor. It also
describes the front panel of the monitor.
For information about See page
Package Contents 10
Installation Guidelines 10
Mounting the XM-720 Monitor 11
Connecting Wiring for Your Monitor 13
Front Panel Description 31
Removing the XM-720 Terminal Blocks 35
ATTENTION
Environment and Enclosure
This equipment is intended for use in a Pollution Degree 2
Industrial environment, in overvoltage Category II applications
(as defined in IEC publication 60664–1), at altitudes up to 2000
meters without derating.
This equipment is supplied as “open type” equipment. It must be
mounted within an enclosure that is suitably designed for those
specific environmental conditions that will be present, and
appropriately designed to prevent personal injury resulting from
accessibility to live parts. The interior of the enclosure must be
accessible only by the use of a tool. Subsequent sections of this
publication may contain additional information regarding specific
enclosure type ratings that are required to comply with certain
product safety certifications.
See NEMA Standards publication 250 and IEC publication
60529, as applicable, for explanations of the degrees of
protection provided by different types of enclosures.