Rockwell Automation MD60 Serial Converter Module - M/N MDCOMM 232 - Manual (Page 22)

4-4 Serial Converter Module (MDCOMM-232)
Step 4. In the Name window, type any name (for example,
converter), and then select any icon in the Icon box.
Step 5. Click OK to display the Phone Number dialog box.
Step 6. In the Connect Using window, select the communications
port that you intend to use (usually COM1 or COM2).
Step 7. Click OK to display the Properties dialog box.
Step 8. Select the settings shown in figure 4.4.
Important: If you have previously set the parameter DF1 Rate Cfg
(03) to 19.2K or 38.4K, select that value in the Bits per
second box.
Figure 4.3 – Connection Dialog Box
Figure 4.4 – COM1 Properties Dialog Box