Rockwell Automation MD60 Serial Converter Module - M/N MDCOMM 232 - Manual (Page 23)

Configuring the Serial Converter 4-5
Step 9. Click OK. A blank HyperTerminal workspace appears.
Step 10. Select File > Properties to display the Properties dialog
box.
Step 11. Click the Settings tab. See figure 4.5.
Step 12. Under the area labeled Function, arrow, and ctrl keys act
as, select Terminal keys.
Step 13. In the Emulation box, select VT100.
Step 14. Click OK to display the HyperTerminal workspace.
TIP: Select File > Save to save the HyperTerminal configuration
that you just created. In future connections, you can select the
saved configuration and quickly connect to the Serial Converter.
Step 15. Press Enter until the main menu appears (see figure 4.6).
Figure 4.5 – Converter Properties Dialog Box
Figure 4.6 – Main Menu
Main Menu - Enter Number for Selection
1> Display Setup Parameters
2> Display Event Queue
3> Flash Upgrade