Rockwell Automation MD60 Serial Converter Module - M/N MDCOMM 232 - Manual (Page 27)

Troubleshooting the Serial Converter 5-1
C
HAPTER
5
Troubleshooting
the Serial Converter
Chapter 5 provides information to troubleshoot the Serial Converter.
5.1 Understanding the Status Indicators
(LEDs)
The Serial Converter reports its status using status indicators. See
figure 5.1.
Sections 5.1.1 through 5.1.3 describe what the state of each
indicator means. Note that if all status indicators are off, the Serial
Converter is not receiving power. Refer to chapter 3 for installation
instructions.
#
Status
Indicator Description Refer to Section
➊ Diamond Serial Converter
status 5.1.1
➋ RX Serial Converter is
receiving data 5.1.2
➌ TX Serial Converter is
transmitting data 5.1.3
Figure 5.1 – Status Indicators on the Serial Converter
➊
➋
➌