Rockwell Automation SA3100 AC Power Modules - Manual (Page 45)

Installation Guidelines 3-27
3.16.2.2Checking the DC Bus Supply
Prior to applying power to any Power Module, operation of the DC bus supply should
be checked for proper connections, proper operation, correct voltage levels, and
correct polarity at termination points. Refer to the appropriate installation and setup
instructions for your system’s specific equipment.
3.16.3 Starting the Drive
The Start-Up procedures for an AutoMax Distributed Power System SA3100 drive are
described in instruction manual S-3059,
Diagnostics, Troubleshooting, and Start-Up
Guidelines. Refer to this manual for the correct procedures to start-up your drive.