Rockwell Automation 2097-V3xPRx-LM Kinetix 300 and Kinetix 350 Drive Systems Design Guide - Manual (Page 21)

Rockwell Automation Publication GMC-RM004C-EN-P - September 2013 21
Kinetix 300 and Kinetix 350 Drive Systems
Kinetix 300/350 (400V-class) Drives with MP-Series Food Grade Motors
This section provides system combination information for the Kinetix 300/350 (400V-class) drives when matched with
MP-Series food-grade motors. Included are motor power/brake and feedback cable catalog numbers, system performance
specifications, and the optimum torque/speed curves.
Bulletin MPF Motor Cable Combinations
For cable configuration illustrations and feature descriptions, by catalog number, refer to 2090-Series Motor/Actuator Cables Overview beginning on page 5 .
Motor-end connector kits, and panel-mounted breakout components (drive end), are available for motor power/brake and feedback cables. Refer to Optional Drive Accessories on page 4 .
Cable length xx is in meters. Refer to the Kinetix Motion Accessories Technical Data, publication GMC-TD004 , for standard cable lengths.
Bulletin MPF Motor Performance Specifications with Kinetix 300/350 (400V-class) Drives
Performance specification data and curves reflect nominal system performance of a typical system with motor at 40 °C (104 °F) and drive at 40 °C (104 °F) ambient, and rated line voltage. For additional
information on ambient and line conditions, refer to Motion Analyzer software.
Motor Cat. No. (400V-class) Motor Power Cable Motor Feedback Cable
(1)
(1) Use low-profile connector kit (catalog number 2090-K2CK-D15M) with flying-lead cables on the drive end. Refer to Required Drive Accessories on page 3 .
MPF-B310P,
MPF-B320P,
MPF-B330P
2090-CP
xM7DF-16AAxx (standard, non-flex)
2090-CP xM7DF-16AFxx (continuous-flex)
2090-CFBM7DF-CEAA
xx or
2090-CFBM7DD-CEAA
xx (standard, non-flex)
2090-CFBM7DF-CEAF
xx or
2090-CFBM7DD-CEAF xx (continuous-flex)
Absolute High-resolution Feedback
Rotary Motor
Speed, max
rpm
System Continuous
Stall Current
A (0-pk) System Continuous
Stall Torque
N•m (lb•in) System Peak
Stall Current
A 0-pk System Peak
Stall Torque
N•m (lb•in) Motor Rated
Output
kW Kinetix 300/350
400V-class
Three-phase Drives
MPF-B310P 5000 2.30 1.58 (14) 7.1 3.61 (32) 0.77 2097-V34PR3- xx
MPF-B320P 5000 4.24 3.05 (27) 14.0 7.34 (65) 1.5 2097-V34PR5- xx
MPF-B330P 5000 5.70 4.18 (37)
16.9 10.0 (88)
1.6
2097-V34PR5- xx
19.0 11.1 (98) 2097-V34PR6-
xx