Rockwell Automation 1440-TTC06-00RE XM-362 Temperature Module - Manual (Page 62)

Publication GMSI10-UM008D-EN-P - August 2010
54
Sets the relay activation logic.
• A or B - Relay is activated when either Alarm A or
Alarm B meets or exceeds the selected Alarm
Status condition(s).
• A and B - Relay is activated when both Alarm A
and Alarm B meet or exceed the selected Alarm
Status condition(s).
• A Only - Relay is activated when Alarm A meets
or exceeds the selected Alarm Status
condition(s).
Options: A only
A or B
A and B
Sets the alarm(s) that the relay will monitor. The
alarm must be from the same device as the relay.
When the Activation Logic is set to "A and B" or "A
or B," you can select an alarm in both Alarm A and
Alarm B. The system monitors both alarms. When
the Activation Logic is set to "A Only," you can
select an alarm only in Alarm A. Options: Channel 1 value alarm
Channel 2 value alarm
Channel 3 value alarm
Channel 4 value alarm
Channel 5 value alarm
Channel 6 value alarm
Channel 1 rate alarm
Channel 2 rate alarm
Channel 3 rate alarm
Channel 4 rate alarm
Channel 5 rate alarm
Channel 6 rate alarm
Channel 1 difference alarm
(Ch1 minus Ch6)
Channel 2 difference alarm
(Ch2 minus Ch1)
Channel 3 difference alarm
(Ch3 minus Ch2)
Channel 4 difference alarm
(Ch4 minus Ch3)
Channel 5 difference alarm
(Ch5 minus Ch4)
Channel 6 difference alarm
(Ch6 minus Ch5)
Note: You can only select an alarm
that is enabled.
Relay Parameters
Parameter Name Description Options/Comments
XM Configuration
Utility EDS File
Activation Logic Logic
XM Configuration
Utility EDS File
Alarm A/B Alarm
Identifier
A/B