Rockwell Automation CS300 Trusted CS300 Bridge Module - Manual (Page 15)

Trusted
TM
CS300 Bridge Module
Issue 01 Apr 08 PD-8162 15
Figure 12 Jumper Setting
This chassis then links into the extension chassis BIC, which is linked to the main CS300 8162 chassis
by ribbon cables.
To add a BIC chassis, right click again on the background and select CS300 BIC. The switch settings
on these chassis should not be changed from their old configuration in the CS300 system. Select the
8162 chassis to connect the new chassis to (Parent 8162 Chassis Number), and enter the chassis
number as configured on the chassis address switches on the BIC chassis (Triguard Chassis
Number). Closing this window and left-clicking on the chassis ends will show the Jumper Config button,
which will confirm the switch settings that have been selected.
Figure 13 BIC Chassis Addressing
The chassis will now show its address on the right end as:
< Trusted
TM expander Interface slot> - <Expander socket number> - <CS300 chassis number>
e.g. 1-2-2 in the above example.