Rockwell Automation 1769-L16ER-BB1B_L18ER-BB1B_L18ERM-BB1B CompactLogix 5370 L1 Controllers System Quick Start - Manual (Page 44)

44 Rockwell Automation Publication IASIMP-QS024B-EN-P - December 2012
Chapter 2 Prepare the Computer and Load Controller Firmware
10. To start the firmware update, click
Finish and then click Yes.
Before the firmware upgrade
begins, you see the following dialog
box. Take the appropriate action
for your application. In this
example, the upgrade continues
when OK is clicked.
When the update completes, the status box informs you that the update was successful.
Install Additional Software - Optional
Depending on your application, you may need to install additional software.
For example, if you are integrating a PanelView Plus terminal into your system, you must install
the following:
• RSLinx Enterprise software
• FactoryTalk® View Machine Edition software
IMPORTANT You must install this software before you install any other additional software.