Add ladder logic to test, The local expansion, Module – Rockwell Automation 1769-L16ER-BB1B_L18ER-BB1B_L18ERM-BB1B CompactLogix 5370 L1 Controllers System Quick Start User Manual
Page 60
Advertising
60
Rockwell Automation Publication IASIMP-QS024B-EN-P - December 2012
Chapter 4 Create a Logix Designer Project
Add Ladder Logic to Test the Local Expansion Module
1. Expand the Tasks folders.
2. Right-click MainRoutine and
choose Open.
A blank MainRoutine opens.
3. From the Element Toolbar, drag
and drop an Examine On and an
Output Energize element onto the
rung.
IMPORTANT
If you do not have a 1734-OB4E module, you can use ladder logic with an embedded output point on the CompactLogix
5370 L1 controller in a similar fashion.
When using an embedded output point, instead of choosing an output point on the local expansion module, as
described in
, you choose an embedded digital output point on the CompactLogix 5370 L1 controller.
Advertising