Rockwell Automation 1769-L16ER-BB1B_L18ER-BB1B_L18ERM-BB1B CompactLogix 5370 L1 Controllers System Quick Start - Manual (Page 59)

Rockwell Automation Publication IASIMP-QS024B-EN-P - December 2012 59
Create a Logix Designer Project Chapter 4
3. Use the tabs to create the
parameters for the I/O module.
4. When the module configuration
is complete, click OK.
The module is added to the I/O
Configuration.
IMPORTANT For the purposes of this
exercise, make sure you
change the Module
Definition parameters so
Electronic Keying is set to
Disable Keying.