Rockwell Automation 1769-L16ER-BB1B_L18ER-BB1B_L18ERM-BB1B CompactLogix 5370 L1 Controllers System Quick Start - Manual (Page 56)

56 Rockwell Automation Publication IASIMP-QS024B-EN-P - December 2012
Chapter 4 Create a Logix Designer Project
3. In the Who Active dialog box, expand the path to the controller and select it.
4. Click Set Project Path.
By clicking this button, you set the
path and do not have to browse to
the controller each time you use an
option in the Who Active dialog.
5. Click Go Online.
You must be online to set the
controller’s IP address in the Logix
Designer project.
6. Click Download twice on successive dialog boxes.
7. Click Yes to change the controller
mode to Remote Run.
8. Expand the I/O Configuration
tree.
9. Right-click the controller and
choose Properties.