AJA FS1 Version 2.2.0.47 - Manual (Page 102)

92
Only editable parameters are saved in the presets. Example non-editable parameters that
are
not saved include 50.6 MAC Address, 80.1 Serial Number, and 80.2 SW Version, as
well as “trigger” parameters, such as 90.0 Reboot, 91.1 Preset Recall, 92.1 Preset Save, and
99.0 Factory Settings.
Additionally, these editable parameters are not stored in the presets:
Export—Saves the associated preset contents to a .presets XML file on your computer.
The .presets file gets exported to the default download location specified in your
browser options. The file name is the same as the preset name with a .presets
extension. If you export multiple files for the same preset, a number gets appended
to ensure a unique file name. The file size is small, usually less than 100 kilobytes.
Import—Use this function to browse for and import into a preset the contents of a
previously exported preset from a file on your computer. A dialog box warns you
that the operation will overwrite the current preset contents with the contents
stored in the file. Click OK to import the configuration from the file or Cancel to
cancel.
Export All—Saves the contents of all 10 presets to an all.presets XML file on your
computer.
The all.presets file gets exported to the default download location specified in your
browser options. If you export multiple files, a number gets appended to ensure a
unique file name. The file size is usually about 2.5 Megabytes.
Import All—Use this function to browse for and import a previously exported all.presets
file from your computer. A dialog box warns you that the operation will overwrite
all 10 current preset contents with the contents stored in the file. Click OK to
import the configuration from the file or Cancel to cancel.
• 35.1 Remote Control • 51.2 SNMP Trap Dest 1
• 35.3 Password • 51.3 SNMP TrapPort 1
• 40.1 Freeze Output • 51.4 SNMP Trap Dest 2
• 50.1 IP Config • 51.5 SNMP Trap Port 2
• 50.2 IP Address • 60.1 Pwr Supply Alarm
• 50.3 Subnet Mask • 60.2 Format Alarm
• 50.4 Default Gateway • 60.3 Reference Alarm
• 50.5 System Name • 70.1 Screen Saver
• 51.1 SNMP Enable • 70.2 Display Intens
Export Click Export to save the preset contents to a .presets file on your computer.
Import Click Import to replace a preset’s contents with the contents of a previously exported file.
Export All Click Export All to save the contents of all 10 presets to an all.presets file on your computer.
Import All Click Import to replace the contents of all 10 presets with the contents of a previously
exported file.