Convert mode screen – AJA FS1 Version 2.2.0.47 User Manual

Page 95

Advertising
background image

1

85

FS1 Installation and Operation Manual — Remote FS1 Control Via a Web

Sample Rate Convert (4.4)

Normally, set this to On (default). Set it to Off only if the following are both true:

1. You want to pass digital encoded audio from either embedded or AES into embedded

and/or AES out.

2. You have the embedded or AES input genlocked to the FS1 output. In other words, the

encoded audio will not survive the frame-sync function (dropping or repeating frames),
so it needs to be set to lock to the input. You can lock to a reference only if that
reference is driving both the FS1 and the upstream source of the embedded or AES
input to the FS1.

Audio Delay, ms (4.2)—This slider allows you to adjust the delay to compensate for video

timing issues (delay/latency). This slider changes the delay from -16 to 256 ms (the
default is zero delay).

Convert Mode
Screen

This screen offers settings for the FS1 upconverter, downconverter, and SD Aspect Ratio
converters.

FS1 Web Interface, Convert Mode Screen

Stereo Map

Channel Map

Embed SDI 1
Embed SDI 2

AES unbal

(Default)

Analog

For the 8 channels of embedded audio out, select stereo inputs according to

Audio Map

parameters 2.21 through 2.24. Any channel pair (4 pair total) can be mapped to 24
different choices.

For the 8 channels of embedded audio out, select and map inputs according to

Audio Map

parameters 2.11 through 2.18. Any of the 16 embedded channels can be mapped to
one of the 48 possible choices.

Use the embedded audio from the

SDI 1 connector as the input source

Use the embedded audio from the

SDI 2 connector as the input source

Select the digital

AES/EBU Audio connectors (8-ch) as the audio input source

Select the

Analog Audio connector (DB25, 8-ch) as the audio input source

On (default)

Off

Normal operation. The FS1 performs audio sample rate conversion and keeps the video and
audio synchronized.
The FS1 does not sample rate convert the audio, leaving embedded audio as is, useful for
Dolby

¤

5.1 embedded audio and other applications.

Advertising