AJA FS1 Version 2.2.0.47 - Manual (Page 51)

1
41 FS1 Installation and Operation Manual — 2.24 Audio Map Ch 7/8
This parameter is used with parameter 2.2—when Stereo Map is selected—to specify
the source of the channel pair for audio output channels 5 and 6. Possible choices are
the same as parameter 2.21. Default = AES Ch 5/6.
2.24 Audio Map Ch 7/8
This parameter is used with parameter 2.2—when Stereo Map is selected—to specify
the source of the channel pair for audio output channels 7 and 8. Possible choices are
the same as parameter 2.21. Default = AES Ch 7/8.
3.1 Component In Format
This parameter configures the format of the Component video input.
3.2 Component Out Format
This parameter configures the format of the Component video output.
3.3 Frame Rate
This parameter selects the HD video frame rate associated with the video standard.
Note: Changing the Frame Rates selection automatically selects a new value for 1.1
Output Format. Each Frame Rates selection remembers its own Output Format
settings.
3.1 Component In Description of Choices
Parameter Adjustments:
Beta YPbPr
SMPTE YPbPr (Default)
Configure the Component video input source as Beta YPbPr (standard definition). If
the selected Component video source is HD, this will default to SMPTE YPbPr.
Configure the Component video input source as SMPTE YPbPr.
3.2 Component Out Description of Choices
Parameter Adjustments:
Beta YPbPr
SMPTE YPbPr (Default)
RGB
Configure the Component video output as Beta YPbPr (standard definition). If the
Component video is HD, this will default to SMPTE YPbPr.
Configure the Component video output as SMPTE YPbPr.
Configure the Component video output as RGB.
3.3 Frame Rate Description of Choices
Parameter Adjustments:
59.94/23.98 (Default)
60/24
50/25
Select the 59.94/23.98 item if your desired rate is either 59.94 or 23.98.
Select the 60/24”item if your desired rate is either 60 or 24.
Select the 50/25 item if your desired rate is either 50 or 25 (PAL).