AJA FS1 Version 2.2.0.47 - Manual (Page 99)

1
89 FS1 Installation and Operation Manual — Remote FS1 Control Via a Web
ProcAmp
Control Screen This screen selects whether the Processing Amplifier (ProcAmp) is On or Off, and if On,
allows adjustment of gain, blacklevel, hue and saturation via slider controls.
FS1 Web Interface, ProcAmp Control Screen
Video In—Selecting a value results in the ProcAmp screen showing the current ProcAmp
settings for that specific input as well as changing the FS1’s input to the one chosen.
Note: ProcAmp controls (Parameters 10.1 through 10.5) are independently kept for
each separate input: SDI 1, SDI 2, Composite, S-Video, and Component.
ProcAmp Enable (10.1)
All—Resets all Proc Amp settings to Unity, regardless of their current settings.
Gain (10.2)—Slider changes video gain from black to 1.5 times luma in steps of .01
Blacklevel (10.3)—Slider adjusts video black level from -20 IRE to +20 IRE in .5 steps.
Hue (10.4)—Slider adjusts video color hue through 360 degrees (color wheel). Slider can
adjust in increments/decrements of 1 degree or more.
Saturation (10.5)—Slider adjusts video color saturation from black & white to 1.5 times
chroma in steps as small as .01.
On
Off (default)
The Processing Amplifier is turned On and all settings are applied to the currently selected
input source
Turns the Processing Amplifier Off—video is passed unaltered.