AJA FS1 Version 2.2.0.47 - Manual (Page 78)

68
50.5 System Name
This parameter defines a unique name for the FS1. This same name is used both
when displaying systems via the web interface and for display on the FS1’s screen
saver (if System Name is chosen in parameter 70.1 Screen Saver).
To eliminate trailing characters in order to shorten an existing system name,
overwrite them with '-', and then press the top Select button twice to save the
changes and exit. Press the bottom Select button to go back to the system name to
verify your entry. Spaces may not be entered in the system name via the front panel.
If spaces in the system name are required, the name must be entered from the web
browser.
50.6 MAC Address
Selecting this parameter allows you to view the FS1 MAC address. The MAC
address is a unique value associated with the FS1’s internal network adapter. MAC
addresses are also known as hardware addresses or physical addresses. MAC
addresses uniquely identify an Ethernet adapter on a LAN.
MAC address format: MM:MM:MM:SS:SS:SS
The value is 12-digit hexadecimal, where the first half identifies the manufacturer
and the second half identifies the unique serial number.
50.5 System Name Description of Choices
Parameter Adjustments:
variable Using the Select and Adjust buttons, enter a name for the FS1, up to 20 characters.
The top Select button advances to the next character, and the bottom Select
button steps back to the previous character. The Adjust buttons scroll through
the choices for each character. The character currently being changed flashes.
The character set allowed is: '-', '.', A through Z (uppercase) and a through z
(lowercase). To save the name, press the top
Select button until you reach the
end of the name and advance to the next item.
Default: aja-fs1