AJA FS1 Version 2.2.0.47 - Manual (Page 43)

1
1
Chapter 4:
Parameter Menus
4
Controlling the FS1 via Front Panel Parameter Menus
There are three ways to control the FS1: (1) remotely from a web browser, (2) using
a remote control panel, and (3) using the front panel Select/Adjust buttons and
Parameter Menus. This chapter deals with the latter—the most direct and all-
inclusive way to configure an FS1.
In Chapter 2 we discussed the panel controls overall, so ensure you’ve read and
understand that material first. In this chapter we discuss each of the Parameter
Menus and their use.
In each parameter screen the parameter number and name appear on the top line of
the display, and the parameter settings are shown on the bottom line of the display;
remember, the current setting is what is shown.
As mentioned in Chapter 2, you enter the parameter menus whenever you press the
Select or Adjust buttons. Here is the general format of the Parameter Menu display:
Parameter Number and Name
Current Parameter Setting