AJA FS1 Version 2.2.0.47 - Manual (Page 111)

1
101 FS1 Installation and Operation Manual — Remote FS1 Control Via a Web
Netmask (50.3)—Enter a subnet mask compatible with your LAN (if you have one). You
must also click the Update IP Address button to update the FS1 with the changed
information entered here.
Default Gateway (50.4)—Enter the IP address for your LAN’s gateway/router (if you have
one). You must also click the Update IP Address button to update the FS1 with the
changed information entered here.
Update Network Settings—Pressing this button requests the FS1 to update its IP
information with what you have entered on this screen.
Available FS1s- Click to Refresh—All of the FS1 devices present on the same local LAN as
the current FS1 are listed below this heading (see note below). The serial numbers of
all FS1s on the LAN, or their defined System Names (see parameter 50.5) are listed—
and clicking on any of these will bring up the Status screen of that FS1. Note: the FS1
you control may be running a different software version so screens may look different.
As a rule, it’s wise to have all your FS1 devices running the most current software and
the same version. Also, without a properly configured default gateway (whether you
have a router/gateway or not), the discovery feature, Available FS1s—Click to Refresh,
on the Network page may not work.
Below the FS1s listed are Others, which are other AJA devices. Items that may appear
here include AJA Ki Pro recorders and AJA KUMO routers.
Note: AJA devices shown are cached and may not reflect the realtime state of all devices
on the LAN. As FS1s and other AJA devices are added or removed from the network they
may take awhile to appear in the listing. If, at anytime you want a current view of the
network (clearing the cache and showing the realtime state), then press the Control key on
your keyboard while clicking the Available FS1s—Click to Refresh link.