Metrohm 863 Compact Autosampler - Manual (Page 47)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 5 Operation
863 Compact Autosampler ￭￭￭￭￭￭￭￭ 37
You can now enter the quantity and the first rack position of the
samples to be processed.
2 Enter the number of samples
￭ Select Number of samples and press [OK].
￭ Enter the number of samples. If the methods to be started via
remote connection are used, the maximum value for the number
of samples (99) can be entered here.
￭ Close the input dialog with [BACK] or Accept.
3 Enter the rack position of the first sample
￭ Select Next sample pos. and press [OK].
￭ Enter the starting position of the sample series.
￭ Close the input dialog with [BACK] or Accept.
The value for the number of samples remains saved for the next sam-
ple series. The position of the first sample is increased with each
method run.
You can still cancel the start of the sample series at this time with
[BACK] or [STOP].
4 Close the sample series dialog
Close the dialog with the [BACK] key.
5 Start the sample series
Start the sample series in the PC software (IC-Net or VA Compu-
trace).
The sample changer is started automatically by the remote connec-
tion.