Metrohm 815 Robotic Soliprep for LC - Manual (Page 29)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 Installation
815 Robotic Soliprep for LC ￭￭￭￭￭￭￭￭ 23
2.7 Mounting the Polytron robotic arm
1
6.1462.250
Mount the 6.1462.070 robotic arm to tower 2 as follows:
1 Hold the robotic arm in such a way that the holder faces to the left and
and slip it over the guide pins of the drive disc from below. While doing
so, let the robotic arm point outwards as far as possible, i.e. towards
the tower - see above.
Note
Take care to ensure that you do not twist the drive disc, thus causing
pressure against the drive.
2 Screw the robotic arm to the Swing Head tightly with the screws and
washers provided.