Metrohm 815 Robotic Soliprep for LC - Manual (Page 34)

2.10 Setting up the rinsing tubings ￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
28 ￭￭￭￭￭￭￭￭ 815 Robotic Soliprep for LC
2.10 Setting up the rinsing tubings
Rinsing tubings at tower 2
6.1805.060
6.1805.120
1 2
Install the tubing for rinsing the washing station as follows:
1 Connect the green inlet tubing (6.1805.120) of the washing station to
one of the four connectors on the tower 2 distributor.
2 Connect three 6.1805.060 tubings (60 cm) to the tower 2 distributor.
3 Fasten a 6.1812.000 PTFE tubing to the tower 2 valve. Connect the
other end of the tubing to a canister with rinsing liquid (e.g. water).
2.11 Opening guide chain
Tubings and cables can be placed into the guide chain of the towers.
You can open the individual chain links with a screwdriver as follows.