Metrohm 833 IC Liquid Handling Unit - Manual (Page 104)

10 Appendix
830 IC Interface / Gebrauchsanweisung 8.830.1001
96
2 6.2744.160 PEEK coupling
With tubing security device for connecting to
pressure side of 6.1826.0X0 Pump tubing.
2 6.2821.120 Filter unit PEEK 2 µ m
To avoid contamination by abraded pump
tubing particles.
Spare part: 6.2821.130 Filter
10.2.2 833 IC Liquid Handling Suppressor Unit
The 2.833.0020 IC Liquid Handling Suppressor Unit includes the following
accessories:
Number Order no. Description
1 1.833.0010 833 IC Liquid Handling Unit
1 6.2122.0X0 Mains cable
to customer’s specification:
Cable socket Cable
plug
Type IEC 320/C 13 Type SEV 12 (CH … )............................... 6.2122.020
Type IEC 320/C 13 Type CEE (7), VII (D … )........................... 6.2122.040
Type CEE (22), V Type NEMA 5-15 (USA … ) ...................... 6.2122.070
1 8.833.0010 Instructions for Use (English)
for 833 IC Liquid Handling Unit
2 6.2128.180 Remote connection cable
Connection cable 830 IC Interface–
833 IC Liquid Handling Unit
1 6.2143.210 Connection cable
Connection cable 732/819 IC Detector –
833 IC LH Suppressor Unit
Control via Remote line 1 and 2.
1 1.753.0100 Suppressor module
1 6.1803.020 PTFE capillary tubing
Length = 5 m
2 6.1826.050 Pump tubing
PVC (Tygon  ) with 2 permanently
attached white-yellow stoppers;
i.d. = 0.57 mm
± 0.05 mm,
delivery rate 0.43 mL/min (20 min -1 )
0.52 mL/min (24 min -1
400
150
2 6.2744.010 PEEK compression fitting
For connecting 6.1831.010 PEEK capillaries or
6.1803.020 PTFE capillaries,
Set of 5 pieces
26
1.57 0.97
11
23
9.5
54