Banner M12 Laser Emitters - Manual (Page 3)

M12 Dimensions
P/N 52989 rev. C
3
M12 Class 2 Laser Emitter
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Excess Gain
57 mm
(2.25")
Green LED
Indicates power applied
Yellow LED
Indicates laser enabled
See "Connections"
in Specifications
ø12.7 mm
(0.50")
Aperture/Caution Label
(Do not clamp only in this area)
DO NOT ST INTO BEA
Peak Power: 2.2mW
, 66
33kHz 25% duty cycle
LASER RADIA
Excess Gain of the M12 emitter is dependent on the particular receiver used.
Following is a comparison of the excess gain for various recommended receivers at
15 m (50').
Receiver
Excess Gain
at 15 m (50')
MULTI-BEAM
SBRX1 19,000
SBR1 19,000
SBRXD1 19,000
SBRD1 19,000
MAXI-BEAM
RSBR 14,000
RSBRSR 1,500
VALU-BEAM
SMW95R 34,000
SMI91RQD 18,000
EZ-BEAM
T18SN6R 7,500
T30SN6R 7,500
S12SN6R 7,500
Receiver
Excess Gain
at 15 m (50')
600
MINI-BEAM
1,200
SM31R 2,500
SM31RL 17,000
SM31RMHS 1,800
SM31RLMHS 11,000
ECONO-BEAM
SE61R
SE61RMHS 500
Others
SM51RB
Q23SN6R 400
Q10AN6R 250
Q45BB6R 9,000
For information on compatibility of the M12 emitter with other Banner photoelectric
receivers contact the factory Applications Group at the address or numbers listed on
the back cover.