Status indicators/troubleshooting – Banner PVA Pick-to-Lights User Manual
Page 6
Status Indicators/Troubleshooting
MODE
Status Indicator #1
Status Indicator #2
Figure 6. Status indicators
Emitter Indicator
Condition
Description
#1
OFF
Frequency A selected (Emitter/Receiver Switch #1 both ON)
Steady Red
Frequency B selected (Emitter/Receiver Switch #1 both OFF)
#2
Steady Green
Power is ON and system is OK
OFF
Power is OFF
Flashing Green 2x/sec
Emitter Failure (remove and reapply power)
Receiver Indicator Condition
Description
#1
Steady Yellow
Output is active (change Switch #2 to Light Operate to turn the yellow indicator ON
when the system is clear)
OFF
Output is inactive (change Switch #2 to Dark Operate to turn the yellow indicator
ON when the system is blocked)
#2
Steady Green
Power is ON and system is OK
OFF
Power is OFF
Flashing Green 1x/sec
Receiver Failure (remove and reapply power)
PVA Pick-to-Light Array
6
www.bannerengineering.com - tel: 763-544-3164
P/N 52088_web
Rev. E