L-gage, Lt3 long-range time-of-flight sensor, Two discrete outputs – Banner L-GAGE LT3 Series User Manual
Page 6: Sensor setup
L-GAGE
®
LT3 Long-Range Time-of-Flight Sensor –
Two Discrete Outputs
6
P/N 68503 rev. C
Banner Engineering Corp.
•
Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Push Button Lockout
Enables or disables the keypad to prevent accidental or unauthorized adjustment of the
programming settings.
Procedure
Result
Push Button
Remote Wire
0.04 sec. ≤ T ≤ 0.8 sec.
Enable/Disable
Push
Buttons
• Not available
via push button
• Four-pulse the
remote line
• Push buttons are either enabled
or disabled, depending on
previous condition
Sensor Setup
Response Speed
Use the Speed push button to toggle between the three response speed settings. The
selected speed is indicated by one of three Response Speed indicator LEDs (see
Figure 2).
Discrete Output Response Speed
Slow
100 ms ON and OFF
Medium
10 ms ON and OFF
Fast
1 ms ON and OFF
T
T
T T T
T T T T T T T
T
T
T
T T