Banner OMNI-BEAM Series - Manual (Page 12)

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 612.544.3164 • Fax: 612.544.3213 • E-mail: [email protected]
OMNI-BEAM Sensor Heads
Replacement Lenses
OMNI-BEAM lens assemblies are field-replaceable.
Model Description
OUC-C
OUC-D
OUC-F
OUC-FP
OUC-L
OUC-LAG Replacement lens for convergent models (model suffix CV)
Replacement lens for short range diffuse models (model suffix D)
Replacement lens for glass fiber optic models (model suffix F, FAC, FV, FX, EF, and RF)
Replacement lens for plastic fiber optic models (model suffix FP)
Replacement lens for non-polarized retroreflective and opposed models (model suffix DX, LV, E and R)
Replacement lens for polarized retroreflective models (model suffix LVAG and LVAGC)
Retroreflective Targets
Banner offers a wide selection of high-quality retroreflective targets. See Banner Product Catalog for complete information.
Cable Protector
HF1-2NPS
• Flexible black nylon cable protector
• Includes a neoprene gland that compresses around the OMNI-BEAM cable to provide an
additional seal against moisture
• Resistant to gasoline, alcohol, oil, grease, solvents and weak acids
• Working temperature range of -30° to +100°C (-22° to +212°F)
Model Description
WARRANTY: Banner Engineering Corporation warrants its products to be free from defects for one year. Banner Engineering Corporation
will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the
warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu
of any other warranty either expressed or implied.