Banner SureCross DX83 Ethernet Bridge - Manual (Page 3)

• User name: system
• Password: admin
5-pin Euro-Style Hookup
Wiring the 5-pin Euro-style connector depends on the model and power requirements of the device. Connecting dc power to the commu-
nication pins will cause permanent damage.
Wire No. Wire Color RS-485 Mode RS-232 Mode
1
2
3
4
5
1 Brown 10 to 30V dc 10 to 30V dc
2 White RS485 / D1 / B / + RS-232 Tx
3 Blue dc common (GND) dc common (GND)
4 Black RS485 / D0 / A / – RS-232 Rx
5 Gray Comms Gnd Comms Gnd
Industrial Ethernet Wiring
Use the 4-pin industrial Ethernet connection to connect the radio network to an Ethernet-based host system.
Wire No. Wire Color Description
1 White/Orange +Tx
2 White/Blue +Rx
3 Orange -Tx
4 Blue -Rx
Serial Communication Configuration for DX83s
The DX83 Ethernet Bridge uses jumpers to select between RS-485 and RS-232 communications.
Install the four jumpers across the two top rows of pins for RS-485 and across the bottom two rows of pins for RS-232.
Communication pins
SureCross DX83 Ethernet Bridge
P/N 131934 Rev. E www.bannerengineering.com - tel: 763-544-3164 3