Banner SureCross DX83 Ethernet Bridge - Manual (Page 5)

Environmental
Rating
IEC IP67; NEMA 6; (See UL section below for any ap-
plicable UL specifications)
Operating Temperature
−40 to +85 °C (Electronics); −20 to +80 °C (LCD)
Operating Humidity
95% max. relative (non-condensing)
Radiated Immunity
10 V/m, 80-2700 MHz (EN61000-6-2)
Shock and Vibration
IEC 68-2-6 and IEC 68-2-7
Shock: 30g, 11 millisecond half sine wave, 18 shocks
Vibration: 0.5 mm p-p, 10 to 60 Hz
Operating the devices at the maximum operating conditions for ex-
tended periods can shorten the life of the device.
Included with Device (DX83 Models)
The following items ship with the DX83 Ethernet Bridge.
• BWA-HW-001: Mounting Hardware Kit, containing four M5-0.8 x 25mm SS screws, four M5-0.8 x 16mm SS screws, four M5-0.8mm
SS hex nuts, and four #8-32 x 3/4" SS bolts
• BWA-EX2M: Ethernet crossover cable, M12 industrial/RJ45, 2 meter
Splitter Cables
Part No. Model No. Description
83265 CSRB-
M1250M125.47M125.73 Splitter cable, 5-pin Euro-style QD, No trunk male, two female
branches, black (shown).
Use to split power between two FlexPower or solar powered
devices. DO NOT use this cable to connect a FlexPower devi-
ces to a 10–30V dc powered device.
75286 CSB-M1240M1241 Splitter cable, 4-pin Euro-style QD, No trunk male, two female
branches, yellow (not shown).
Used to split power between two 10–30V dc powered devices,
such as a data radio and Gateway, or between a DX85 and
Gateway.
13805 CSRB-
M1253.28M1253.28M1253.28 Splitter cable, for dual power sources, 5-pin Euro female to 2
5-pin Euro males
Used to connect one FlexPower device (data radio, FlexPow-
ered Gateway, etc) to two power sources, such as the Flex-
Power Solar Supply and DX81P6 Battery Pack.
14642 BWA-HW-026 Splitter cable, wall wart for external power split to 5-pin Euro-
style male and 5-pin Euro female (to power a M-H at 1 Watt
while configuring it through the MHCT)
13250 BWA-DRSPLITTER Splitter cable, DB9 Female (RS232) trunk to 5-pin Euro-style
male and female
Ethernet Cables
Part No. Model No. Description
77669 BWA-E2M Ethernet cable, RSCD RJ45 440, 2M
78469 BWA-E8M Ethernet cable, RSCD RJ45 440, 8M
78467 BWA-EX2M Ethernet cable, crossover, RSCD RJ45CR 440, 2M
Use a crossover cable to connect the DX80 GatewayPro or DX83 Ethernet Bridge to a host system without using an Ethernet switchbox
or hub. When using a switchbox or hub, use a straight cable.
SureCross DX83 Ethernet Bridge
P/N 131934 Rev. E www.bannerengineering.com - tel: 763-544-3164 5