Banner Compact Metal Style Safety Interlock Switches - Manual

Machine Safety Switch: SI-LM40 Series Limit
Switch Style
SI-LM40 Series Limit Switch Style with Flexible In-Line Actuator
Printed in USA Nov 2012 P/N 50159 Rev. F
• Positive-opening safety contacts (IEC 60947-5-1) (not dependent upon springs)
• Standard limit switch design
• In-line actuator; flexes in all directions
• Metal housing
• Spring-loaded actuator base
• Protective Earth Terminal (IEC 60947-1) on models with metal housings
Note:
This symbol for a positive opening safety contact (IEC 60947-5-1) is used in the
switching diagrams to identify the point in actuator travel where the normally closed safety
contact is fully open.
Kit Model
†
Actuator Type
†
Interlock Body
†
Contact
Configuration
(Actuator Engaged)
Contact
Configuration
(Actuator Removed)
Switching Diagrams*
SI-LM40MKVD
SI-QM-90A
Flexible, In-Line
SI-LM40KVD
with Metal
Housing
23 24
11 12
23 24
11 12
3 (0.12)
1 (0.04)*
0 (0)
7 (0.28)
38 (1.5)
mm (in)
Engaged
Disengaged
11-12 23-24
Safety
Monitor
SI-LM40MKVE
SI-LM40KVE
with Metal
Housing
21 22
11 12
21 22
11 12
3 (0.12)
0 (0)
7 (0.28)
38 (1.5)
mm (in)
Engaged
Disengaged
11-12 21-22
Safety Safety
† A kit contains an interlock and actuator. Individual interlock bodies or actuators are for replacement purposes only. See Warning below.
* Please note that only 1 mm (0.04 inches) of movement will open the closed contact.
Contacts: Open Closed Transition
WARNING... Spare actuators must NEVER be used to bypass or otherwise defeat the protective function of a safety switch. To do so
may create an unsafe situation which could lead to serious injury or death.