Banner Enclosures - Manual

EZA-S Series Enclosures
For mounted protection of EZ-SCREEN ™ Point and Grid Sensors and Mirrors
Features
• 12 models available: 5 with corner mirrors, 2 with return 45° mirrors for access
guarding applications; 5 to house EZ-SCREEN Point and Grid Sensors
• Models meet ANSI/RIA 15.06 and ISO 13855 standards for beam spacing
• Robust aluminum housing with a tough safety yellow finish
• Independently adjustable mirrors to simplify alignment
• Circular bubble level on top of enclosure with three leveling screws in base
• Base allows enclosure to rotate up to 20°
Banner EZA-S Series Enclosures are designed specifically for use with Banner EZ-SCREEN
Point and Grid models. The enclosures are constructed of a powder coated extruded
aluminum housing with an anodized aluminum top plate and mounting base. The
enclosures have leveling and rotational positioning capabilities. Units with mirrors have
3 adjusting screws per mirror to optimize beam direction. The enclosures are available in
12 different models to accommodate ANSI/RIA 15.06 and ISO 13855 beam spacing
standards. The rear-surfaced glass mirrors are rated at 85% efficiency per mirror and
reduce maximum range by 8% per mirror.
Printed in USA 02/12
P/N 109308 rev. B
NOTE . . .
Reduced
Sensing Range
Sensing range is reduced to
85% efficiency per mirror.
WARNING . . .
Maintain Required Separation Distance
The light screen produced by the optical safety system sensors must be placed at a minimum safe distance from the
dangerous motion of the machine being guarded. This necessary minimum distance is called the separation distance, and is
discussed in Section 3 of the appropriate manuals. Failure to calculate this distance correctly and to maintain minimum
separation distance can result in serious injury.
Models*
Enclosure
Height
L1**
No. of
Windows
Distance from Floor
to Bottom Window
L2**
Protected
Height
Application
Standard
EZ-SCREEN
Models
EZA-S300
1543 mm
(60.75")
4
300 mm
(11.8")
900 mm
(35.4")
ANSI/RIA R15.06
ISO 13855
SG(XL)P4-300
EZA-S400 1238 mm
(48.75")
3
300 mm
(11.8")
800 mm
(31.5")
ANSI/RIA R15.06
ISO 13855
SG(XL)P3-300
EZA-S300-M
EZA-S400-M
EZA-S533 1543 mm
(60.75")
3
305 mm
(12.0")
1066 mm
(42.0")
ANSI/RIA R15.06 SG(XL)P3-533
EZA-S533-M
EZA-S500
1035 mm
(40.75")
2
400 mm
(15.8")
500 mm
(19.7")
ISO 13855
SG(XL)P2-500
EZA-S500-M45
EZA-S500-M
EZA-S584
1238.2 mm
(48.75")
2
305 mm
(12.0")
584 mm
(23.0")
ANSI/RIA R15.06
SG(XL)P2-584
EZA-S584-M45
EZA-S584-M
Models
Distance
Between Beams
L3**
300 mm
(11.8")
400 mm
(15.8")
533 mm
(21.0")
500 mm
(19.7")
584 mm
(23.0")
*Model numbers with suffix “M” include vertical mirrors for perimeter-guarding applications.
Model numbers with suffix “M45” include two 45°-mounted mirrors for access-guarding applications.
**Refer to Figure 1.
SP(XL)P1
SP(XL)P1