Banner SC22-3E Safety Controller with Ethernet User Manual
Sc22-3/-3e safety controller instruction manual
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Contents
- 1 About This Document
- 2 Overview
- 2.1 Ethernet-Compatible Model
- 2.2 Applications
- 2.3 Design and Testing
- 2.4 Components
- 2.5 Configuring the Safety Controller
- 2.6 Input and Output Connections
- 2.7 System Settings
- 2.8 Internal Logic
- 2.9 Password Overview
- 2.10 Confirming a Configuration
- 3 Components and Specifications
- 4 System Installation
- 4.1 Appropriate Application
- 4.2 Installing the Safety Controller
- 4.3 Safety Input Devices
- 4.4 Non-Safety Input Devices
- 4.5 Input Device Resets
- 4.6 Safety Input Function
- 4.7 EDM, OSSD (Safety Output), and FSD Hookup
- 4.8 Status Outputs
- 4.9 Virtual Status Outputs
- 4.10 Commissioning Checkout
- 5 PC Interface Configuration (PCI)
- 6 Onboard Interface Configuration (OBI)
- 7 Operating Instructions
- 8 System Checkout
- 9 Troubleshooting
- 10 Input Device and Safety Category Reference
- 10.1 Safety Circuit Integrity and ISO 13849-1 (EN954-1) Safety Circuit Principles
- 10.2 Protective (Safety) Stop
- 10.3 Interlocked Guard or Gate
- 10.3.1 Safety Circuit Integrity Levels
- 10.3.2 Safety Interlock Switch Requirements
- 10.4 Optical Sensor
- 10.5 Two-Hand Control
- 10.6 Safety Mats
- 10.7 Emergency Stop Push Buttons
- 10.8 Rope/Cable Pull
- 10.9 Enabling Device
- 10.10 Bypass Switches (Bypassing Safeguards)
- 10.11 Mute Sensor Pair
- 10.11.1 The Muting Function
- 10.11.2 Muting Function Requirements
- 10.11.3 Muting Device Hookup Options
- 10.11.4 Mute Enable (ME)
- 10.11.5 Mute Lamp Output (ML)
- 10.11.6 Muting Time Limit (Backdoor Timer)
- 10.11.7 Mute on Power-Up
- 10.11.8 Corner Mirrors, Optical Safety Systems, and Muting
- 10.11.9 Multiple Presence-Sensing Safety Devices
- 10.11.10 Mute Timing Sequences
- 11 Ethernet Reference
- 12 Glossary