Banner SC22-3E Safety Controller with Ethernet - Manual (Page 21)

3 Components and Specifications
To order the Safety Controller ready for use, order it as part of a kit
(see following table). It also can be ordered alone, without terminals,
as a replacement part.
Kits include the Safety Controller, model SC22-3 or SC22-3E, a set of
plug-on terminal blocks (screw or cage-clamp type, depending on
model), a USB A/B cable (for direct connection between a PC and the
Safety Controller, included with some kits), external non-volatile mem-
ory card (XM card, with write-on label on reverse side), XM card pro-
gramming tool (included with some models), a user CD (includes soft-
ware interface, online manual, ethernet references and configuration
tutorials), and quick start guide.
3.1 Safety Controller Starter Kit Models
Kit Model
Terminal
Type
Safety
Outputs
Status
Outputs
Safety Out-
put Rating
USB A/B
Cable
XM
Card
XM Card Pro-
gramming Tool
Communication
Protocol
SC22-3-S Screw
6 PNP
Terminals
(3 pairs)
10 Status
0.75 amps
each output
─
Yes
─
─
SC22-3-C Clamp
SC22-3-SU1 Screw
1.8 m Yes
SC22-3-CU1 Clamp
SC22-3E-S Screw
10 Status
plus
32 Virtual
Status
0.5 amps
each output
─ ─
EtherNet/IP &
Modbus/TCP
SC22-3E-C Clamp
SC22-3E-SU1 Screw
1.8 m Yes
SC22-3E-CU1 Clamp
3.2 Replacement Parts/Accessories
Model Description
SC22-3 Replacement Controller (no terminals)
SC22-3E Replacement Controller (no terminals), Ethernet compatible
SC-XM1 External memory card (XM card)
SC-XM1-5 Bulk pack of 5 XM cards
SC-XMP USB programming tool for XM card
SC-TS1 Screw terminal replacement set
SC-TC1 Cage clamp terminal replacement set
SC-USB1 USB A/B cable, 1.8 m
134534 CD including PCI program and instruction manual
P/N 133487 rev. C www.bannerengineering.com - tel: 763-544-3164 21