Banner WORLD-BEAM QS30 Series - Manual

WORLD-BEAM ® QS30AF Sensor
Push-Button-SET Adjustable-Field Sensor
Printed in USA 08/04 P/N 111384 rev. D
Features
• Push-button adjustable-field background suppression sensor detects objects within
a defined sensing field, while ignoring objects located beyond the sensing field
cutoff
• Easy cutoff point push-button SET options: Background Suppression SET, Object
Detection SET and Dynamic SET, plus manual adjustments.
• Easy push-button N.O./N.C. and output OFF-delay setup
• Powerful, highly collimated visible red sensing beam
• Tough ABS housing is rated IEC IP67; NEMA 6
• Easy-to-read operating status indicators, with 8-segment bargraph display
• Bipolar discrete outputs, PNP and NPN
• Selectable 30 millisecond OFF-delay
• Models available with 2 m or 9 m (6.5' or 30') cable or integral quick-disconnect
• Compact housing, mounting versatility – via popular 30 mm threaded barrel or
side-mount
Models
* 9 m (30') cables are available by adding suffix “ W/30 ” to the model number of any cabled sensor (e.g., QS30AF W/30 ).
A model with a QD connector requires a mating cable (see page 9).
WARNING . . .
Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury or death.
This product does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications.
A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety
Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
!
Visible Red, 660 nm
Model Cutoff Point Cable* Supply Voltage Output Type
QS30AF
50 to 300 mm
(2" to 12")
2 m (6.5')
5-wire Cable
10 to 30V dc Bipolar NPN/PNP
QS30AFQ
Integral 5-pin
Euro-style QD