Banner PresencePLUS P4 GEO 1.3 Series - Manual (Page 135)

The Coordinate tool can be used with the PresencePLUS Remote Command Channel (RCC), which is used
to interface and operate industrial robots.
Fields
The following are fields on the Coordinate tool Input tab:
• Coordinate Tool Inputs7.4.2.1 Coordinate Tool Inputs on page 136
Supported Platforms
BCR/BCR
1.3 GEO/GEO
1.3 EDGE/EDGE
1.3 AREA/AREA1.3 OMNI/OMNI
1.3 OMNI Color ProII/ProII
1.3 ProII Color
No No No No Yes Yes Yes Yes
Coordinate Tool Input Tab
135 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000
PresencePLUS Software Tools 7/2009