Banner PresencePLUS P4 GEO 1.3 Series - Manual (Page 74)

Main Tasks to Complete Step 5
6. Click the Back button.
7. Cleck the Next button to exit the Test Tool configuration.
Main Tasks to Complete Step 6
In the PresencePLUS GUI, click the Go To Run button. When prompted to save
the inspection: Save and Start Inspection
1. Enter a name in the Inspection Name field.
2. Click on the Save button.
3. Once the inspection is saved, click the Start button to start the inspection.
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
74
7/2009 System Setup Window Overview