Banner PresencePLUS P4 GEO 1.3 Series - Manual (Page 88)

• Click on Setup Mode if you want the camera to start in Setup Mode after it is powered down.
• Click on Inspection Name, and select an inspection from the drop-down list to have the sensor
start up to run.
Start-Up Inspection Tab
P4 Start-Up Inspection Tab
ProII Start-Up Inspection Tab
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
88
7/2009 System Setup Window Overview