Banner PresencePLUS P4 GEO 1.3 Series - Manual (Page 28)

To select an inspection (in the Select tab), enable Software Override, and select the inspection file from
the list of stored inspections on the camera. •
• An alternate method is to use Hardware input to select an inspection via discrete inputs to the controller.
5. Begin inspection:
To begin inspecting, click the Start button in the Run screen.
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
28
7/2009 Getting Started