Banner PresencePLUS P4 GEO 1.3 Series - Manual (Page 144)

• Determine the distance between Blobs
• Determine a distance between a Blob and a closest point on a bead
• Determine a distance between a Blob and a farthest point on a bead
Fields
The following are fields on the Measure tool Input tab:
• Measure Tool Operations7.4.4.1 Measure Tool Operations on page 145
• Measurement Type7.4.4.2 Measurement Type on page 153
Supported Platforms
BCR/BCR
1.3 GEO/GEO
1.3 EDGE/EDGE
1.3 AREA/AREA1.3 OMNI/OMNI
1.3 OMNI Color ProII/ProII
1.3 ProII Color
Yes Yes Yes Yes Yes Yes Yes Yes
Measure Tool Input Tab
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
144
7/2009 PresencePLUS Software Tools