Banner PresencePLUS P4 GEO 1.3 Series - Manual (Page 72)

Main Tasks to Complete Step 4
Add a Coordinate
tool to provide
1. In the PresencePLUS GUI, click the Analysis Tools tab.
2. Click the Coordinate tool button to create a Coordinate tool.
locational data for
the Robot.
3. Select Offset Only from the Tool List Filter drop-down menu.
4. Click the Next button to return to the Tools menu.
Note: The X, Y and Rotation selections will default to GF_1.
P/N 000000 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
72
7/2009 System Setup Window Overview