Banner S12 Series - Manual

Datasheet
• Economical opposed-mode (beam-break) sensor pairs in 12-millimeter
diameter barrel-style housings
• Sensing range of 15 meters (50 feet)
• Totally self-contained; 10 to 30 V dc operation
• Complementary outputs: one normally open, one normally closed;
choice of NPN (sinking) or PNP (sourcing) configuration, 100 mA max.
(continuous)
• One output may be used as a marginal signal alarm
• LED status indicators for Power On, Output Overload, Object Sensed,
and Low Gain conditions
Visible Red, 680 nm
Models Cable
Output
Type
Excess Gain
Beam Pattern (Effective
beam: 8.1 mm)
S126E Emitter 2 m (6.5 ft)
-
1
10
100
1 m
3.3 ft
10 m
33 ft
100 m
330 ft
.1 m
.33 ft
1000
DISTANCE
EXCESS
GAIN
S12 Series
Opposed Mode
25 m
82 ft 20 m
66 ft
15 m
49 ft
10 m
32 ft
5 m
16 ft
0
0
500 mm
1000 mm
1500 mm
500 mm
1000 mm
1500 mm
0
20 in
40 in
60 in
20 in
40 in
60 in
DISTANCE
S12 Series
Opposed Mode
S126EQP Emitter 4-Pin Pico QD
S12SN6R Receiver 2 m (6.5 ft)
NPN
S12SN6RQP
Receiver
4-Pin Pico QD
S12SP6R Receiver 2 m (6.5 ft)
PNP
S12SP6RQP
Receiver
4-Pin Pico QD
To order 9 m (30 ft) cable models, add the suffix “W/30” to the model number of any cabled sensor (e.g. - S12SN6R W/
30). Models with a QD connector requires an accessory mating cable.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
EZ-BEAM S12 Series Opposed-Mode Sensor
Pairs
Original Document
34501 Rev. B
27 March 2014
34501