Banner S12 Series - Manual (Page 4)

Model Description Dimensions
AP12SC
Includes lens, o-ring, thread-on housing, and 3 circular apertures
with openings of:
• 0.5 mm (0.02 inch) diameter
• 1.0 mm (0.04 inch) diameter
• 2.5 mm (0.10 inch) diameter
AP12SR
Includes lens, o-ring, thread-on housing, and 3 rectangular
apertures with openings of:
• 0.5 mm (0.02 inch) wide
• 1.0 mm (0.04 inch) wide
• 2.5 mm (0.10 inch) wide
4-Pin Snap-on M8/Pico-Style Cordsets
Model Length Style Dimensions Pinout
PKG4-2 2.00 m (6.56 ft) Straight
ø 9.0
32 Typ.
4
3 1
2
1 = Brown
2 = White
3 = Blue
4 = Black
PKW4Z-2 2.00 m (6.56 ft) Right-Angle
ø 10.9
29 Typ.
15 Typ.
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following
the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture
which, at the time it is returned to the factory, is found to have been defective during the warranty period. This warranty
does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR
IMPLIED (INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE, COURSE OF DEALING OR
TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO
EVENT SHALL BANNER ENGINEERING CORP. BE LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR
ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL OR
SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE
PRODUCT, WHETHER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY,
NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any
obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.
EZ-BEAM S12 Series Opposed-Mode Sensor Pairs
www.bannerengineering.com - tel: 763-544-3164