Banner L-GAGE Q50 Series - Manual (Page 6)

L-GAGE Q50A Complementary Discrete Output Sensor Specifications
L-GAGE Q50A –
Complementary Discrete Output Sensor
page 6
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Q50A: 50 to 200 mm (2.0" to 7.9") Sensing Range
Sensing Repeatability
Output Protection
Supply Voltage 12 to 30V dc (10% maximum ripple); 70 mA max. (exclusive of load)
Supply Protection Circuitry Protected against reverse polarity and transient overvoltages
Delay at Power-up 2 seconds
Sensing Beam Wave length Q50AV: 685 nm (typical) Q50A: 880 nm (typical)
Beam Size Q50AV: 20 mm dia. (max.) Q50A: 20 mm dia. (max.)
Output Rating Complementary Discrete Output 150 mA maximum, per output
OFF-state leakage current: Less than 10 micro-amps
ON-state saturation voltage: Less than 1V @ 10 mA and less than 1.5V @ 100 mA
Protected against false pulse on power-up and continuous overload or short circuit of outputs
Output Response Time 2-second delay on power-up
Fast: 4 ms ON, 4 ms OFF
Slow: 48 ms ON, 48 ms OFF
Slow Response (Q50A): 0.5% of sensing distance
Fast Response (Q50A...Y): 1.0% of sensing distance
Output Hysteresis See Figure 3
Color Sensitivity (typical) See Figure 4
Q50AV: 50 to 150 mm (2.0" to 5.9")
Remote Teach Input
Impedance 15 k
Ω
Remote Teach Input To Teach: Connect gray wire to +5 to 30V dc
To Disable: Connect gray wire to 0 to +2V dc (or open connection)
Adjustments Sensing Window Limits: TEACH-mode programming of near and far window limits may be set using the
Teach push button or remotely via the gray Teach wire.
Indicators Range LED Green — Target is within sensing range
Indicator Red — Target is outside sensing range
(green/red) Flashing Green – Outputs are overloaded
OFF — Sensor Power OFF
Teach/Output Yellow (window limits) — Target is within taught limits
LED Indicator Yellow (fixed field) — Target is closer than cutoff limit
(yellow/red) OFF — Target is outside taught window limits
Red — Sensor is in TEACH mode
Minimum Taught Window
(millimeters) Model
Number
Ambient Light Immunity <10,000 Lux
Output Configuration SPDT (complementary) solid-state dc switch. Choose NPN (current sinking) or PNP (current sourcing)
outputs.
Q50A..Y
Q50A..
Q50AV..Y
Q50AV..
Distance
50 mm 75 mm 100 mm 125 mm 150 mm 175 mm 200 mm
– – 5 4 2 1.5 1
– – 9 7 4 3 2
7 6 5 4 2 1.5 1
15 12 9 7 4 3 2