Banner Q45 Series - Manual (Page 4)

Convergent-Mode Models
These sensors are ideal for reflective sensing of very small parts or profiles, and can accurately sense the
position of parts approaching from the side. Will ignore all but highly reflective objects that are outside
the sensing range.
Performance curves are based on a 90% reflectance white test card.
Output Type: SPDT Electro-mechanical relay
CONVERGENT
Visible red, 680 nm
Models Focus Cable Excess Gain Beam Pattern
Q45VR2CV
38 mm (1.5 in)
Spot Size at Focus:
1.3 mm (0.05 in)
5-wire 2 m (6.5 ft)
cable
1
10
100
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
1 mm
.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45CV
Convergent Mode
190 mm
7.5 in
150 mm
6.0 in
113 mm
4.5 in
75 mm
3.0 in
38 mm
1.5 in
0
0
1.2 mm
2.5 mm
3.8 mm
1.2 mm
2.5 mm
3.8 mm
0
0.05 in
0.10 in
0.15 in
0.05 in
0.10 in
0.15 in
DISTANCE
Q45CV
Convergent Mode
Q45VR2CVQ 5-Pin Mini-style QD
Q45VR2CV4
100 mm (4 in) Spot
Size at Focus: 1.5
mm (0.06 in)
5-wire 2 m (6.5 ft)
cable
1
10
100
10 mm
.4 in
100 mm
4 in
1000 mm
40 in
1 mm
.04 in
1000
E
X
C
E
S
S
G
A
I
N
DISTANCE
Q45CV4
Convergent Mode
190 mm
7.5 in
150 mm
6.0 in
113 mm
4.5 in
75 mm
3.0 in
38 mm
1.5 in
0
0
1.2 mm
2.5 mm
3.8 mm
1.2 mm
2.5 mm
3.8 mm
0
0.05 in
0.10 in
0.15 in
0.05 in
0.10 in
0.15 in
DISTANCE
Q45CV4
Convergent Mode
Q45VR2CV4Q 5-Pin Mini-style QD
To order the 9 m (30 ft) cable model, add suffix "W/30" to the cabled model number. (For example: Q45VR2CV W/30.)
Models with a QD connector require a mating cable.
Q45VR2 Series Sensors
4 www.bannerengineering.com - tel: 763-544-3164 P/N 36339 Rev. F