Banner PicoDot PD Series User Manual

Pd49 series ruggedized picodot, Datasheet, Retroreflective-mode models

Advertising
background image

Datasheet

Environmentally sealed housing is only slightly larger than standard PD45

models, with all the functionality. Rated IEC IP67; NEMA 6

Class 2 laser diode light source

Convergent beam models have precise, high-energy sensing spot at focus,

available in four focal lengths: 50 mm (2 in), 100 mm (4 in), 200 mm (8 in),

and 300 mm (12 in)

Retroreflective models have precise, narrow beam; excellent for sensing the

presence of tiny parts at close range, small parts at medium ranges, and for

accurate sensing over long distances

Fast, 0.2 millisecond sensing response for high-speed sensing or counting

10 to 30 V dc operation; choice of NPN or PNP complementary solid state output

Choose models with 2 m (6.5 ft) or 9 m (30 ft) unterminated cable, or with 150

mm (6 in) Euro-style pigtail quick-disconnect (QD) connector

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Retroreflective-Mode Models

Excellent for applications where high sensing power and small beam size are

important. Operates over sensing ranges typically accomplished only by

conventional opposed-mode photoelectrics; uses a special filter to polarize the

emitted light, filtering out unwanted reflections from shiny objects.

To order 9 m (30 ft) cables, add “W/30” to the model number of any cabled

sensor (e.g., PD49VN6LLP W/30). Models with QD connectors require a mating

cable.

P

POLAR RETRO

Visible Red; Class 2 laser; 650 nm

Models

Range

1

Cable

Output

Type

Excess Gain

2

PD49VN6LLP

0.2 to 10.6 m (8 in

to 35 ft)

2 m (6.5 ft) cable

NPN

1

10

100

1.0 m

3.3 ft

10 m

33 ft

100 m

330 ft

0.1 m

0.33 ft

1000

E

X

C

E

S

S

G

A

I

N

DISTANCE

Retroreflective PicoDot

with BRT-51X51BM

PD49VN6LLPQ

5-pin QD 150 mm (6 in)

pigtail

PD49VP6LLP

2 m (6.5 ft) cable

PNP

PD49VP6LLPQ

5-pin QD 150 mm (6 in)

pigtail

1 Tested using a BRT-51x51BM retro target (included with each sensor). Actual range depends on the efficiency and size of the retroreflective target used.

Some targets have produced ranges up to 39.6 m (130 ft).

2 Performance based on BRT-51X51BM retroreflective target

PD49 Series Ruggedized PicoDot

®

P/N 67450 Rev. B

20 December 2013

Advertising