Banner K50 Pick-to-Light EZ-LIGHT - Manual

Self-contained indicator for bin-picking operations
For the latest technical information about this product, including specifications, dimensions, and wiring, see www.BannerEngineering.com
Standard Models - Single Color
• Job light is ON at all times while job input is active.
• Presence of hand (or pressing push button) activates output.
Model Sensing Mode / LED* Housing Range Cable* Output*** Job Light
K50APLPGXDQ
Polarized retroreflective,
visible red, 680 nm
50 mm dome
30 mm mount
polycarbonate
2 m (6 ft)
Integral
4-pin
Euro QD
PNP, NO
Green
K50RPLPGXDQ PNP, NC
K50ANLPGXDQ NPN, NO
K50RNLPGXDQ NPN, NC
K50APFF50GXDQ
Fixed field, infrared, 880 nm
50 mm cutoff
PNP, NO
K50RPFF50GXDQ PNP, NC
K50ANFF50GXDQ NPN, NO
K50RNFF50GXDQ NPN, NC
K50APFF100GXDQ
100 mm cutoff
PNP, NO
K50RPFF100GXDQ PNP, NC
K50ANFF100GXDQ NPN, NO
K50RNFF100GXDQ NPN, NC
K50APPBGXDQ
Push button —
PNP, NO
K50RPPBGXDQ PNP, NC
K50ANPBGXDQ NPN, NO
K50RNPBGXDQ NPN, NC
* Only 4-pin integral Euro-style QD models are listed. For 2 m (6 ft) PVC cable model, omit suffix "Q" from model number (e.g., K50APLPGXD).
For 9 m (30 ft) PVC cable model, replace suffix "Q" with "W/30" (e.g., K50APLPGXD W/30).
For 150 mm (5.9 in) PVC pigtail with 4-pin Euro-style fitting, replace suffix "Q" with "QP" (e.g., K50APLPGXDQP).
A model with a QD requires a mating cordset.
**NO = Normally Open; NC = Normally Closed
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury or death. This
product does NOT include the self-checking redundant circuitry necessary to allow its use in personnel safety applications. A sensor
failure or malfunction can cause either an energized or de-energized sensor output condition.
K50 Series Pick-to-Light
P/N 125680 Rev. C 8/13/2012
0 125680 8