Banner MULTI-BEAM Series - Manual (Page 2)

Banner Engineering Corp. 9714 Tenth Ave. No. Minneapolis, MN 55441 Telephone: (612)544-3164 FAX (applications): (612)544-3573
WARNING
MULTI-BEAM ® photoelectric presence sensors described in this catalog do NOT include the self-
checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction
can result in either an energized or a de-energized sensor output condition.
Never use these products as sensing devices for personnel protection. Their use as a safety device may create an unsafe
condition which could lead to serious injury or death.
Only MACHINE-GUARD and PERIMETER-GUARD Systems, and other systems so designated, are designed to meet OSHA and ANSI
machine safety standards for point-of-operation guarding devices. No other Banner sensors or controls are designed to meet these standards,
and they must NOT be used as sensing devices for personnel protection.
!
WARRANTY: Banner Engineering Corporation warrants its products to be free from defects for one year. Banner Engineering Corporation will
repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period.
This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either
expressed or implied.
Contents
Introduction to MULTI-BEAM ® Modular Sensors ........................... page 3
Selection of components and summary of available models ............ pages 4-6
MULTI-BEAM
® 3- and 4-wire Sensors ............................................ pages 6-23
3- and 4-wire Scanner Blocks ................................................. pages 6-14
3- and 4-wire Scanner Block modifications ........................... page 14
3- and 4-wire Power Blocks ................................................... pages 15-20
3- and 4-wire Logic Modules ................................................. pages 21-23
MULTI-BEAM ® 2-wire Sensors ....................................................... pages 24-29
2-wire Scanner Blocks ............................................................ pages 24-26
2-wire Power Blocks .............................................................. pages 27-28
2-wire Logic Modules ............................................................ page 29
MULTI-BEAM ® Accessories ............................................................ pages 30-31
Upper Covers (lens assemblies).............................................. page 30
Lower Covers ......................................................................... page 30
Mounting Brackets ................................................................. page 31
Quick Disconnect ................................................................... page 31