Banner MULTI-BEAM Series - Manual (Page 30)

UC-L
Used on:
SBE
SBEV
SBEX
SBR1
SBRX1
SBL1
SBLV1, SBLX1, SBDL1, SBDX1, SBAR1,
SBAR1GH, 2SBR1, 2SBL1, 2SBDX1,
3GA5-14, EM3T-1M, R1T3
UC-D
Used on:
SBD1
SBED
SBRD1
SBEXD
SBRXD1
2SBD1
Flat vinyl lens
for short range and/or wide beam angle.
Standard replacement cover for all scanner blocks.
LCMB LCMBMTA
"MTA" = Modified Timing Access. Gasketed nylon
screw covers for logic module timing adjustments.
30
Replaces UC-L in sensing locations where highly
caustic materials are present (e.g. acid vapor or
splash). Glass lens.
Anti-glare (polarizing) filter for retroreflective
sensing of shiny objects.
Adds plastic dust cover to UC-L. Used when sensor
is mounted facing up (used to prevent dust/dirt
buildup on lens). Identical to UC-D, but with addition of plastic dust
cover to prevent accumulation of dust/dirt in lens
area.
UC-LAG
(
Used on
SBLVAG1)
UC-LJ UC-DJ UC-LG
These upper covers are used in special sensing environments.
For fiberoptic emitter-only scanner blocks. For fiberoptic receiver-only scanner blocks.
UC-EF
Used on:
SBEF
SBEXF
UC-RF
Used on:
SBRF1
SBRXF1
SBAR1GHF
UC-F
( Used on:
SBF1,
SBF1MHS,
SBFX1,
SBFV1,
2SBF1).
Fits all Banner fiberoptic assemblies.
UC-C 1.5 inch (38mm) focus, glass lenses
UC-C4 4 inch (10cm) focus, glass lenses
UC-C6 6 inch (15cm) focus, glass lenses
"MB" = Modified with Baffle; for short-range proxi-
mity mode with SBDX1.
UC-DMB
(
Used on
SBDX1MD)
MULTI-BEAM Accessories
Lower Covers
Replacement lower covers fit all MULTI-
BEAM scanner blocks. Lower covers
include gaskets and four stainless steel
mounting screws.
Special Upper Covers
An upper cover consists of the optical element for the MULTI-BEAM which is built into a gasketed cover for the upper portion of the scanner
block. Upper covers may be ordered as replacement parts or for modifying the optical response of a particular model scanner block. The
following upper cover assemblies are standard and stocked. Other special variations may be quoted. Stainless steel hardware is included with
each cover. NOTE: See the MULTI-BEAM Accessories section of the Banner product catalog for information on interchangeability of upper
covers between various scanner block models.
Upper Covers (Lens Assemblies)